Dual Shot Machine
Tirebarless
Low Hours
Min Mold Height: 5.9"
Max Mold Height: 13.7"
-
OUT OF STOCK
Retractable Tie Bar -
OUT OF STOCK
Min Mold Thickness: 19.69" Max Mold Thickness: 43.31" Low Hours Includes Automatic Mold Clamp System -
OUT OF STOCK
Maximum Mold: 10.24" Minimum Mold: 5.12" -
OUT OF STOCK
Maximum Mold: 10.24" Minimum Mold: 5.12"
-
OUT OF STOCK
- Low Hours
- Hardened Bi-Metallic Barrell & CPM Screw (Jan 2014)
- High Speed Injection
- Transformer for 480 to 240 conversion
- 8 zone mold temp controller
- Pneumatic valve controller on nozzle
- Robot not included
-
OUT OF STOCK
Dual Shot Machine
Shot size: 8 / 7.6 oz.
Low Hours
Min Mold Thickness: 7.87"
Clamp Stroke: 23.62"
Polar-form rotary turntable platen -
OUT OF STOCK
- Includes Wittmann Robot
- Screw Diameter: 18 mm
- Barrel / Screw Condition: Excellent
-
OUT OF STOCK
- Max Mould Opening Stroke: 13.78"
- Min / Max Plate Distance: 9.8" / 23.6"
- Tiebar Diameter: 2.17"
- Ejector Stroke: 3.15"
- Screw Stroke: 4.72"
- Nozzle Stroke: 8.27"
- Screw Diameter: 28 mm
-
OUT OF STOCK
Robot: Conair Sepro 2004 -
OUT OF STOCK
Includes: Nirtrided Barrel, Airblow, Mounting Pads, Feed throat temp controls
-
OUT OF STOCK
Includes Chiller and Dryer -
OUT OF STOCK
Yushin RA II-250 Robot available -
OUT OF STOCK
Table dims 14" x 43" x 1/4" C-Style Clamp extended for Molds up to 10��� x 14��� Light Curtain Guarding Controls upgraded to for single station use from left or right side. -
OUT OF STOCK
35mm Screw Low Hours -
OUT OF STOCK
Low Hours AC Servo Motor Control Robot Interface Anti-Wear / Anti- corrosive Package (Type 1) -
OUT OF STOCK
Yushin AT-120S Robot available -
OUT OF STOCK
2-station Rotary table 60" 6" clamp stroke -
40mm barrel recent upgrades: pneumatic corepull 1 fold on moving platen -
OUT OF STOCK
Includes: Magnetic platen Sprue picker Low hours -
OUT OF STOCK
Double Toggle -
OUT OF STOCK
Yushin HOP III 750 Sprue Picker available -
OUT OF STOCK
Mold blow circuit At least 1 valve gate circuit -
OUT OF STOCK
Magnetic Platens (Additional Cost) Screw diameter 120mm L/D 24:1 Automatic Feed Throat Magnet Scrap Shoot and Conveyor Platen Bolt Pattern: SPI STD Knockout: SPI STD (3x4)(5x20)(8x26)+(8x32) H Extended Tie Bars Tie Bar Puller Tandem Software Shutoff Nozzle Center Support for Tandem molds Blue Power Package -
OUT OF STOCK
- Low Hours
- 2 position rotary table
- 55mm screw
- Mold heat zone
- Center hook up for water and hydraulics
-
OUT OF STOCK
Turntable diameter: 63 Die plate Dimensions: 33.5 x 26.4 Clamping Stroke: 14.6 Minimum Mold Thickness: 13.8 Max Opening Distance: 720 mm Ejector Stroke: 3.1 Heating Bands Power: 11.3 Kw
-
FLA 45.9 Low Hours -
OUT OF STOCK
Includes robot cage, safety cage, conveyor
Model: Duo 1000H/2000H/600H/700 WPX combi US
Min Mold Height: 23.6"
Max Mold Height: 46.4"
Opening Stroke: 82.6" -
OUT OF STOCK
Inj Unit #1 2000H on center, 60mm
Inj Unit #2 1000H on operator side, 50mm
(prepared for a third inj unit 600H, non op-side)
2-station rotary table RD 1800x175mm -
- Hours 56,857
-
OUT OF STOCK
Includes Heat exchanger and TWK Thermal Boiler
-
OUT OF STOCK
- Mold Thickness: 9.8" - 20.1"
- Screw Diameter: 1.97"
- Plasticizing Capacity: 254 lbs/h
- Injection Pressure: 24,250 psi
- Clamping Stroke: 17.7"
- Min Mold Dims: 15.6" x 15.6"
-
High Speed Injection Programmable Valve gate -
OUT OF STOCK
Low hours
-
OUT OF STOCK
- Yushin Robot RCII-400S-19-13 w. new E-Touch II Controller
- Only 86 hours
- Air Blow off Circuit
- Control for Valve Gate System
- 2 Complete Screw and Barrels
- Stainless Steel Hopper
-
OUT OF STOCK
- Screw Diameter: 55mm
- Clamp stroke: 41.3���
- Mold Height: 13.8��� / 41.3���
- Eject force: 13.5 Tons
- Injection Pressure: 35,600psi
-
OUT OF STOCK
2-station vertical rotary 64.9" diameter rotary table Vertical injection unit Min/Mold Height: 11.6" -
OUT OF STOCK
Screw Diameter: 40mm Min / Max Mold Height: 5.91��� / 17.72��� Injection Pressure: 27,848 psi Ejector Stroke: 4.72��� -
55mm barrel -
55mm barrel -
55mm barrel Mold height Min. 9.85 Max. 29.52 -
OUT OF STOCK
Max Injection Pressure: 34,650 psi Min/ Max Mold Height: 8.6��� / 28.75��� Clamp Stroke: 25.2��� -
OUT OF STOCK
Max Injection Pressure: 26,100 psi Min/ Max Mold Height: 8.6��� / 28.75��� Clamp Stroke: 25.2���
-
OUT OF STOCK
- Includes: Mounting Pads, Air Blow
-
OUT OF STOCK
Secondary equipment available for additional cost: Dryer hopper loader Thermolators MoldMaster temp control unit -
OUT OF STOCK
Variable sequence airblow
