-
OUT OF STOCK100mm GP screw 17500 injection pressure
-
OUT OF STOCKrobot available
-
OUT OF STOCKrobot available
-
OUT OF STOCKWittmann Robot Model: W641 CB
-
OUT OF STOCKWittmann Robot Model: W440CB
-
OUT OF STOCK
- Includes Cincinnati Robot
- New screw and barrel
-
OUT OF STOCKRemak Robot Screw with vented barrel, electric screw drive Baumuller Bum64, 5 Cores, 6 cascade control hydraulic with 2 position valves, 4-10 out water manifold, 1 slide monitoring input, 8 mold heaters
-
OUT OF STOCK
- Remak Robot
- Screw with vented barrel
- Electric screw drive Baumuller Bum64
- 5 Cores
- 6 cascade control hydraulic with 2 position valves
- 4-10 out water manifold
- 1 slide monitoring input
- 8 mold heaters
- Screw Diameter: 95 mm
-
OUT OF STOCK
- Min Daylight: 11.8"
- Cycle Times: 70 sec.
- Max Mold Height: 39.4���
- Screw Diameter: 110 mm
- Injection Pressure: 22,749 PSI
- Injection Rate: 35.8 in3/sec
- Min Mold Height: 11.8���
- Screw L/D Ratio: 20:1
- Clamp Stroke: 39.4���
-
OUT OF STOCK
- Robot Payload: 23 lbs
- 5 Cores
- Vented Screw and Barrel
- Screw Diameter: 95 mm
-
OUT OF STOCK
- Robot Payload: 23 lbs.
- 5 Cores
- Screw Diameter: 95 mm
- Includes Remak Robot
-
OUT OF STOCK
- Clamp Stroke: 52"
- Min Shut Height: 18.1"
- Ejector Stroke: 7.87"
- Screw Diameter: 110 mm
-
OUT OF STOCK
- Clamp Weight: 57,000 lbs.
- Injection Unit Weight: 20,000 lbs
- Screw Diameter: 90 mm
- Screw L/D: 24:1
- Minimum Die Height: 17.72"
- Platen Bolt Pattern: Metric
- Knockout: SPI STD. (2x8")(3x14")
- Plasticizing Rate: 578 kg/hr
-
OUT OF STOCKRetractable Tie Bar
-
OUT OF STOCK
- # of Nozzle Locations: 11 Rows x 18 Columns
- Tie Bar Diameter: 12"
- 100 lb Shot
-
OUT OF STOCKMin/Max Shut Height: 13.8"/41.3"
Clamp Stroke: 46.25"
Ejector Stroke: 9.8"
Screw Diameter: (A) 60mm (B) 50mm
L/D Ratio: (A) 23.6:1 (B) 24.3:1
Max Plastic psi: (A) 29841 (B) 30668 -
OUT OF STOCK
- Min/Max Mold Height: 15.7���/ 44.1���
- Ejector Stroke: 9.84���
-
OUT OF STOCKTie Bar Height (Floor to Top Tie Bar): 114��� Hook Height�� (Hook to floor): 235.5��� x 254.5��� Hook height to Tie bar: 121.5��� Tie Bar Diameter: 7.08��� Max / Min Shut Height: 41.34��� / 13.78���
-
OUT OF STOCKTie Bar Height (Floor to Top Tie Bar): 114��� Hook Height�� (Hook to floor): 235.5��� x 254.5��� Hook height to Tie bar: 121.5��� Tie Bar Diameter: 7.08��� Max / Min Shut Height: 41.34��� / 13.78���
-
OUT OF STOCK
- Min shut height: 13.8"
- Max. shut height: 41.3"
- Clamp Stroke: 46.25"
- Ejector Stroke: 9.8"
- L/D Ratio: A23:6:1 B-24:3:1
- Max plastic psi: A-29841 B-30668
- Full Load Amps: 700A main breaker
- At Additional Cost: FANUC R-2000iA/165F RJ3iB
-
OUT OF STOCKEngel mold locking system on the platen
-
OUT OF STOCKRobot Optional
Screw diameter: 115mm
1 corepull
3 air blows
Min mold with ejectors: 11.5"
Min mold without ejectors: 27.25"
Clamp stroke: 56"
Injection stroke: 18.5"
L/D: 20:1
Extra pump on machine for high speed clamp tonnage -
OUT OF STOCKInj Unit #1 2000H on center, 60mm
Inj Unit #2 1000H on operator side, 50mm
(prepared for a third inj unit 600H, non op-side)
2-station rotary table RD 1800x175mm -
OUT OF STOCKIncludes robot cage, safety cage, conveyor
Model: Duo 1000H/2000H/600H/700 WPX combi US
Min Mold Height: 23.6"
Max Mold Height: 46.4"
Opening Stroke: 82.6"