-
OUT OF STOCKMin. daylight: 65" Screw diameter: 4.5"
-
OUT OF STOCKWide Platen Machine
-
OUT OF STOCKWide Platen Machine
-
OUT OF STOCK
- New Controller
- Wittmann Robot - W641 series (50lbs load)
-
OUT OF STOCK
- Min. Shut height: 16.5���
- Max. Shut height: 55.1���
- 2-Platen
- 24 zone Hot Runner
- No Valve Gates
-
OUT OF STOCKSpacer Thickness: 23.2" x 14"
Max Daylight with spacer: 77.6"
Screw Diameter: 5.51" / 140mm
Min Mold Height: 17.3"
Stroke: 60.2"
Ejectors A, B
Cores A, B, C, D -
OUT OF STOCKSpacer Thickness: 23.2" x 14"
Max Daylight with spacer: 77.6"
Screw Diameter: 5.51" / 140mm
Min Mold Height: 17.3"
Stroke: 60.2"
Ejectors A, B
Cores A, B, C, D -
OUT OF STOCK
- Minimum Mold Height: 27.6"
- Minimum Daylight: 27.56"
- Clamp Stroke: 64.96"
- Ejector Stroke: 13.78"
- Ejector Force: 31.47 Tons
-
OUT OF STOCKDie Thickness: 25.59��� - 51.18��� Clamping Stroke: 59.05��� Ejector Force: 42 Tons Ejector Stroke: 9.84��� Screw Diameter: 4.72���
-
OUT OF STOCKABB Robot Available at additional cost Model: IRB 7600M2000 2nd Shot Injection Unit Available: Capacity: 26oz. Screw Diameter: 60mm Screw Stroke: 12.59��� Inten. Ratio: 17-1
-
OUT OF STOCKIncludes: New clamp rings Dubric engineered clamp seal New ceramic heater bands Rebuilt injection cylinders
-
OUT OF STOCKNew screw & barrel and check
-
OUT OF STOCKEjector Stroke: 10"
Min. Mold Height: 17" -
OUT OF STOCK4 Shot Injection Molding Machine
Husky Robot
Low Hours
Shot Size: 17/28/10/38 oz. -
OUT OF STOCK1800 US Tons No valve gates Hot Runners - 24 zone 4 Cores on stationary platen, 2 cores on moving
-
OUT OF STOCKEngel ERC Robot
-
OUT OF STOCKStar Robot: Model TWS-1700 FEC
Hydraulic Mold Clamps
Valve Gate Controls -
OUT OF STOCKTwo Platen
Screw Diameter: 140mm
Star HHY 2000 FM3 Robot -
OUT OF STOCK
- Low Hours
- Ejector plate + hydraulic ejector
- 6 mold nozzles
- 4 cores
- 4 mold cavity pressure transducers
- 65 lbs payload BOSCH controlled servo-robot
- Height of Center Mold: 70.87"
- Screw Diameter: 4.72"
-
OUT OF STOCKWittman robot
Retractable tie bars
Mixing screw -
OUT OF STOCKLoader System: 12VDC pro rate, single hoppers, single inlets L/D Ratio: 22.9:1 Max Inj Hyd PSI: 2175 psi Max Plastic PSI: 26750 psi Max Inj. Stroke: 31.5��� Intensification Ratio: 12.3:1
-
OUT OF STOCKNew barrel & screw New pumps New traverse cylinder New ram seal