Skip to content
-
- Screw Diameter: 40 mm
- Minimum Mold Height: 5.9"
- Maximum Mold Height: 15.7"
-
- Screw Diameter: 40 mm
- Minimum Mold Height: 5.9"
- Maximum Mold Height: 18.7"
-
Model: VH500-41
ID: PE2238
- Cycle Times: 20 Seconds
- Full Load Amps: 156.7
-
Model: K-TEC 450 ETW
ID: PE2004
-
-
- New Barrel and Screw Xaloy 802
-
Model: FN 4000/180-50A
ID: PE1682
- VNII EA 150SL Yushin Robot
-
Model: EW1350RS
ID: PE2029
- Min. Shut height: 16.5���
- Max. Shut height: 55.1���
- 2-Platen
- 24 zone Hot Runner
- No Valve Gates
-
- Dual Corepull
- SPI Robot Interface
- RJG Process Monitoring System
-
Model: H3500EP-600
ID: PE1655
- 2 Platen Clamp
- Clamp and injection unit automatic lubrication systems
- 2006 Star Robot, Model: TW-2000FMIII-3
- Includes:
- Novatech dryer, Conair GB series 2 chamber gravimetric batch blender feed hopper system, Advantage Intellitemp T-1000 Model, TDM-9120B chiller, all related catwalks, stairs and platforms
- Trim Cell Equipped w/ The Following:
- 2000 ABB Model 2400 Robot with IRB2400-M98A Controls
- Teach Pendant TEC 36��� x Approx. 10��� Flat Discharge Belt Conveyer
-
Model: H3500-600
ID: PE1656
- 2 Platen clamp
- Clamp & injection automatic lubricating system
Includes:
- Thoreson McCosh Dryer System, Thoreson McCosh Feed Hopper,�� 2005 Star Robot, Model: TW-2000FMIII-3, Advantage Chiller, All Related Catwalks, Stairs & Platforms
- Trim Cell Equipped w/ The Following:
- 1999 ABB Model 2400 Robot w/IRB2400-M98A Controls and Teach Pendant, TEC 36��� x Approx. 10��� Flat Discharge Belt Conveyer with Drive, Related Cage And Lockout Ststem
- Mold Change System: 2003 Pascel Mold Change System that can Service Two Machines, Model: QMC2-30-GK M201A-01403 With Allen Bradley PLC Controls and Mold Clamping System
-
-
Model: Si-300III
ID: PE2179
- Chrome screw, bi-metallic barrel and free flow check ring
- Low Hours
-
Model: FN4000 50A
ID: PE1814
-
Model: FN4000 50A
ID: PE1815
-
- Clamp Stroke: 50���
- Mold Thickness: 11���
-
-
Model: M3000 HP400
ID: PE2078
- Retractable tie bars
- 12 built in valve gate controls
-
Model: ISGN190-10B
ID: PE1816
- New Screw and Barrel 2007
- Min Mold Thickness: 9.1���
-
Model: ISGN250-10B
ID: PE1817
- New Screw and Barrel 2006
- Min Mold Thickness: 10.2���
-
Model: ES 35 TL
ID: PE1473
- Clamp Stroke: 13.00
- Min Mold Height: 5.91���
- Screw Diameter: .98���
- KO Stroke: 3.94���
- Inj Stroke: 3.90
-
- Screw Size: 5���
- Min. Daylight: 15���
-
- Screw Size: 4"
- Minimum Daylight: 15"
-
- 2 Platen Machine
- 3 Core-pulls, Robot Interface
- Screw Size: 135mm
-
- Screw Size: 4"
- Minimum Daylight: 15"
-
- Minimum Daylight: 51.2"
- Barrel / Screw Condition: Good / Excellent
- Shifts Run: 3 x 5 Days
- Recent Upgrades: New Pump in 2012
-
-
-
Model: VT 440-34
ID: PE2133
-
Model: VT 440-34
ID: PE2134
-
-
- 3- stage air eject
- Sprue Break
- Eject Retract Verification
-
Model: 110/470-310
ID: PE1812
-
Model: 60/420/120
ID: PE1813
-
Model: 100/420-310
ID: PE1809
-
Model: 110/470-310
ID: PE1810
-
Model: 500 H-RS-60F
ID: PE2184
-
Model: 170HT-8F
ID: PE1806
-
-
Model: BA950/315
ID: PE1611
-
- Yushin Sprue Picker Available
- Screw Size: 40mm
-
Model: ES-2000-450
ID: PE2017
- Min/Max Mold Height:��15.8���/ 34���
- Ejector Stroke: 9.45���
-
Model: 80ET 800-200
ID: PE2246
-
Model: ISG120V10-3A
ID: PE2247
- Barrel Condition: Good
- Clamp Stroke: 20"
- Screw Diameter: 1.42"
- Heating Zones: 1 Nozzle / 3 Barrel
- Screw Condition: Good
-
- Screw Diameter: 45 mm
- Ejector Stroke: 4.72���
- Min/Max Mold Height: 7.87��� - 19.68���
- Injection Unit Size: C560M
-
- Clamp Stroke: 29.55���
- Ejector Stroke: 5.04���
-
Model: 320s-500-60
ID: PE1389
-
Model: FS160S36ASE
ID: PE1804
- High wear barrels and screws
-
Model: FS160S36ASE
ID: PE1805
- High wear barrels and screws
-
Model: FS160S36ASE
ID: PE1407
Page load link
