-
Tank Diameter 36' Eave Height: 21' 5" Peak Height: 31' 4" Gallons: 185,500 -
OUT OF STOCK
Screw Diameter: 80 mm; L/D 24:1 Minimum Die Height: 14.75��� Knockout: SPI STD (2 x8) (3x14)
-
OUT OF STOCK
New CPV screw & barrel
-
OUT OF STOCK
New +5 year mfg. warranty Ejector stroke 9.8" Screw 80mm -
OUT OF STOCK
Includes Tie Bar Puller -
OUT OF STOCK
Includes Tie Bar Puller -
OUT OF STOCK
Includes Tie Bar Puller -
- 10 machine hours
- Includes 230 step down transformer
- Model IN60H/40
- Max daylight 22.4"
- Insert Molding
-
Robot included 2nd shot is vertical Low hours -
- Dims: 570” x 175” x 140” @ 265,000 lbs.
- 140mm screw
- Min Mold size 43.7” x 38.1”
- Not ANSI/ OSHA certified
- Includes Mold Cart for side loading
-
OUT OF STOCK
Variable sequence airblow -
OUT OF STOCK
Recent upgrades include 4 core pull circuits /servo controlled EJ Low hours -
OUT OF STOCK
Recent upgrades include 4 core pull circuits /servo controlled EJ Low hours -
OUT OF STOCK
Recent upgrades include 4 core pull circuits /servo controlled EJ Low hours -
OUT OF STOCK
Secondary equipment available for additional cost: Dryer hopper loader Thermolators DME temp control unit -
OUT OF STOCK
Variable sequence airblow -
OUT OF STOCK
Secondary equipment available for additional cost: Dryer hopper loader Thermolators MoldMaster temp control unit -
OUT OF STOCK
- Includes: Mounting Pads, Air Blow
-
OUT OF STOCK
Max Injection Pressure: 34,650 psi Min/ Max Mold Height: 8.6��� / 28.75��� Clamp Stroke: 25.2��� -
OUT OF STOCK
Max Injection Pressure: 26,100 psi Min/ Max Mold Height: 8.6��� / 28.75��� Clamp Stroke: 25.2���
-
55mm barrel Mold height Min. 9.85 Max. 29.52 -
55mm barrel -
55mm barrel -
OUT OF STOCK
Screw Diameter: 40mm Min / Max Mold Height: 5.91��� / 17.72��� Injection Pressure: 27,848 psi Ejector Stroke: 4.72��� -
OUT OF STOCK
2-station vertical rotary 64.9" diameter rotary table Vertical injection unit Min/Mold Height: 11.6" -
OUT OF STOCK
- Screw Diameter: 55mm
- Clamp stroke: 41.3���
- Mold Height: 13.8��� / 41.3���
- Eject force: 13.5 Tons
- Injection Pressure: 35,600psi
-
OUT OF STOCK
- Yushin Robot RCII-400S-19-13 w. new E-Touch II Controller
- Only 86 hours
- Air Blow off Circuit
- Control for Valve Gate System
- 2 Complete Screw and Barrels
- Stainless Steel Hopper
-
OUT OF STOCK
Low hours
-
High Speed Injection Programmable Valve gate -
OUT OF STOCK
- Mold Thickness: 9.8" - 20.1"
- Screw Diameter: 1.97"
- Plasticizing Capacity: 254 lbs/h
- Injection Pressure: 24,250 psi
- Clamping Stroke: 17.7"
- Min Mold Dims: 15.6" x 15.6"
-
OUT OF STOCK
Includes Heat exchanger and TWK Thermal Boiler
