Equipment

• Recent Upgrades: New Pump 2012
• Barrel & Screw Condition: Excellent

• Die Height Min: 32.5"
• Clamp Stroke: 94.4"

• Rotary Two Platen
• Two Color Shot
• Min / Max Die Height: 15.75" / 43.31"
• Clamp Stroke: 66.92"
• Motor: 125 HP
• 29" Between Injection Unit

• Clamp Stroke - Max: 17"
• Mold Thickness - Min: 6"
• Tie Bar Diameter: 3.25"
• Closing / Opening Clamp Speed: 26 / 38 in/sec
• Ejector Force: 4.9 US Tons
• Ejector Stroke: 4.5"

Rebuilt in 2007 Valve Gates Tie Bar Height (Floor to Top Tie Bar): 102��� Hook Height (Hook to Floor): 235.5��� / 254.5��� Hook Height to Tie Bar: 133.5��� Min / Max Daylight (Stroke): 77.5��� / 40.07��� Max / Min Shut Height: 57.17��� / 19.69��� Ejector Stroke: 8���

Tie Bar Height (Floor to Top Tie Bar): 114��� Hook Height�� (Hook to floor): 235.5��� x 254.5��� Hook height to Tie bar: 121.5��� Tie Bar Diameter: 7.08��� Max / Min Shut Height: 41.34��� / 13.78���

• Min Mold Thickness: 14.2"

• Min / Max Mold Height: 10.43" / 21.5"
• Clamp Stroke: 23.6"
• Max Ejector Stroke: 5.1"
• KO Pattern: 7x7 or 16x4 or C
• Hopper, Leveling Pads, Manual

• Barrel & Screw Condition: Good
• Horizontal Injection
• 3 Station Rotary
• Clamp Stroke: 13.78"
• Ejector Stroke: 2.36"
• Min Mold Height: 11.81"

 

• Min/Max Mold Height: 7.9��� / 25.6���
• Full Load Amps: 92

• Min/Max Mold Height: 7.9��� / 25.6���
• Full Load Amps: 92

• Minimum Mold Height: 27.6"
• Minimum Daylight: 27.56"
• Clamp Stroke: 64.96"
• Ejector Stroke: 13.78"
• Ejector Force: 31.47 Tons

• Robot Payload: 23 lbs.
• 5 Cores
• Screw Diameter: 95 mm
• Includes Remak Robot

• 29" Center to Center on Barrels
• Side by Side Barrels
• Upgrades: Rotary Table Bearing, Drivers, Screw Motors, Robot Servo Motors, Servo Valves for Clam Control
• Minimum Mold Thickness: 23.75"

• Max Injection Pressure (Plastic PSI): 1254 bar
• Screw Diameter: 100 mm
• Screw Stroke: 11.19"
• Minimum Mold Height: 18.89"
• Clamp Stroke: 27.17"
• Ejector Stroke: 9.84"

• Minimum Daylight: 5.9"
• Screw Diameter: 30 mm
• X MELT High Speed Filling Equipment
• Full Load Amps: 85 amps

Includes: Nirtrided Barrel, Airblow, Mounting Pads, Feed throat temp controls

• Full Load Amps: 34
• Motor Rebuilt in 2015
• Floppy Disc Drive Updated to USB in 2014
• DME�� MUD ���U��� style frame Model 11/11

• Robot Payload: 23 lbs
• 5 Cores
• Vented Screw and Barrel
• Screw Diameter: 95 mm