-
OUT OF STOCKScrew Diameter: 80 mm; L/D 24:1 Minimum Die Height: 14.75��� Knockout: SPI STD (2 x8) (3x14)
-
OUT OF STOCKNew CPV screw & barrel
-
OUT OF STOCKNew +5 year mfg. warranty Ejector stroke 9.8" Screw 80mm
-
OUT OF STOCKIncludes Tie Bar Puller
-
OUT OF STOCKIncludes Tie Bar Puller
-
OUT OF STOCKIncludes Tie Bar Puller
-
OUT OF STOCKVariable sequence airblow
-
OUT OF STOCKRecent upgrades include 4 core pull circuits /servo controlled EJ Low hours
-
OUT OF STOCKRecent upgrades include 4 core pull circuits /servo controlled EJ Low hours
-
OUT OF STOCKRecent upgrades include 4 core pull circuits /servo controlled EJ Low hours
-
OUT OF STOCKSecondary equipment available for additional cost: Dryer hopper loader Thermolators DME temp control unit
-
OUT OF STOCKVariable sequence airblow
-
OUT OF STOCKSecondary equipment available for additional cost: Dryer hopper loader Thermolators MoldMaster temp control unit
-
OUT OF STOCK
- Includes: Mounting Pads, Air Blow
-
OUT OF STOCKMax Injection Pressure: 34,650 psi Min/ Max Mold Height: 8.6��� / 28.75��� Clamp Stroke: 25.2���
-
OUT OF STOCKMax Injection Pressure: 26,100 psi Min/ Max Mold Height: 8.6��� / 28.75��� Clamp Stroke: 25.2���
-
OUT OF STOCKScrew Diameter: 40mm Min / Max Mold Height: 5.91��� / 17.72��� Injection Pressure: 27,848 psi Ejector Stroke: 4.72���
-
OUT OF STOCK2-station vertical rotary 64.9" diameter rotary table Vertical injection unit Min/Mold Height: 11.6"
-
OUT OF STOCK
- Screw Diameter: 55mm
- Clamp stroke: 41.3���
- Mold Height: 13.8��� / 41.3���
- Eject force: 13.5 Tons
- Injection Pressure: 35,600psi
-
OUT OF STOCK
- Yushin Robot RCII-400S-19-13 w. new E-Touch II Controller
- Only 86 hours
- Air Blow off Circuit
- Control for Valve Gate System
- 2 Complete Screw and Barrels
- Stainless Steel Hopper
-
OUT OF STOCKLow hours
-
OUT OF STOCK
- Mold Thickness: 9.8" - 20.1"
- Screw Diameter: 1.97"
- Plasticizing Capacity: 254 lbs/h
- Injection Pressure: 24,250 psi
- Clamping Stroke: 17.7"
- Min Mold Dims: 15.6" x 15.6"
-
OUT OF STOCK
Includes Heat exchanger and TWK Thermal Boiler
-
OUT OF STOCKIncludes robot cage, safety cage, conveyor
Model: Duo 1000H/2000H/600H/700 WPX combi US
Min Mold Height: 23.6"
Max Mold Height: 46.4"
Opening Stroke: 82.6" -
OUT OF STOCKInj Unit #1 2000H on center, 60mm
Inj Unit #2 1000H on operator side, 50mm
(prepared for a third inj unit 600H, non op-side)
2-station rotary table RD 1800x175mm -
OUT OF STOCKTurntable diameter: 63 Die plate Dimensions: 33.5 x 26.4 Clamping Stroke: 14.6 Minimum Mold Thickness: 13.8 Max Opening Distance: 720 mm Ejector Stroke: 3.1 Heating Bands Power: 11.3 Kw
-
OUT OF STOCK
- Low Hours
- 2 position rotary table
- 55mm screw
- Mold heat zone
- Center hook up for water and hydraulics
-
OUT OF STOCKMagnetic Platens (Additional Cost) Screw diameter 120mm L/D 24:1 Automatic Feed Throat Magnet Scrap Shoot and Conveyor Platen Bolt Pattern: SPI STD Knockout: SPI STD (3x4)(5x20)(8x26)+(8x32) H Extended Tie Bars Tie Bar Puller Tandem Software Shutoff Nozzle Center Support for Tandem molds Blue Power Package
-
OUT OF STOCKMold blow circuit At least 1 valve gate circuit
-
OUT OF STOCKYushin HOP III 750 Sprue Picker available
-
OUT OF STOCKDouble Toggle
-
OUT OF STOCKIncludes: Magnetic platen Sprue picker Low hours
-
OUT OF STOCK2-station Rotary table 60" 6" clamp stroke
-
OUT OF STOCKYushin AT-120S Robot available
-
OUT OF STOCKLow Hours AC Servo Motor Control Robot Interface Anti-Wear / Anti- corrosive Package (Type 1)
-
OUT OF STOCK35mm Screw Low Hours
-
OUT OF STOCKTable dims 14" x 43" x 1/4" C-Style Clamp extended for Molds up to 10��� x 14��� Light Curtain Guarding Controls upgraded to for single station use from left or right side.
-
OUT OF STOCKYushin RA II-250 Robot available
-
OUT OF STOCKIncludes Chiller and Dryer
-
OUT OF STOCKIncludes: Nirtrided Barrel, Airblow, Mounting Pads, Feed throat temp controls
-
OUT OF STOCKRobot: Conair Sepro 2004