-
Recent upgrades include: High tonnage clamp cylinder with new DJP board -
OUT OF STOCK
Min. Mold with spacer 6.1" Min. Mold without spacer: 12.2" Clamp stroke 29.9" Ejector stroke 5.8" -
OUT OF STOCK
- Min / Max Mold Height: 10.43" / 21.5"
- Clamp Stroke: 23.6"
- Max Ejector Stroke: 5.1"
- KO Pattern: 7x7 or 16x4 or C
- Hopper, Leveling Pads, Manual
-
OUT OF STOCK
Battenfeld Robot Available -
OUT OF STOCK
- Min / Max Mold Height: 5.98" / 21.96"
- Ejector Stroke: 5.12"
-
OUT OF STOCK
- Min / Max Die Height: 5.91" / 22.05"
- Max Stroke: 18.11"
- Screw Diameter: 45 mm
-
OUT OF STOCK
New Barrel and Screw in 2010
Robot - 1999 Dal Mascio, Model #E 2800
Wide Platen Option
Dual Air Blow -
OUT OF STOCK
Clean Room Machine
Clamp Stroke: 17.32"
Min. Mold Thickness: 8.66"
Max. Mold Thickness: 7.72" -
OUT OF STOCK
- Magnetic Die Change System
-
OUT OF STOCK
2 Platen -
OUT OF STOCK
Clamp Stroke: 13.77"
Min Mold Thickness: 9.84"
Star Sprue Picker Robot
Custom Horizontal loader unit
-
OUT OF STOCK
2 hydraulic core pull circuits, air blast circuit, valve gate circuit Min Mold Height: 25.59" Max Mold Height: 51.18" 2003 Ranger Robot Model: RT-1000S3/D -
OUT OF STOCK
Min Mold Height: 23.62��� Max Mold Height: 47.24��� Includes: Two thermolators, IR2000M93A ABB robot, platforms, conveyor -
OUT OF STOCK
- Carbide Barrel, CPM9V Barrier Screw
-
OUT OF STOCK
- Barrel Condition: Good
- Clamp Stroke: 20"
- Screw Diameter: 1.42"
- Heating Zones: 1 Nozzle / 3 Barrel
- Screw Condition: Good
-
OUT OF STOCK
- Ejector Stroke: 2.8"
-
OUT OF STOCK
- Screw Diameter: 1.57���
-
OUT OF STOCK
Min Mold Height: 11.8"
Max Mold Height: 72.5" -
OUT OF STOCK
3 air blows
2 core pulls
Sprue break -
OUT OF STOCK
Includes: Air Blast -
OUT OF STOCK
Includes: Foremost 3 Component Blender Dual 40 HP Grinder 2,000 lb. capacity surge bins and vacuum loaders
-
OUT OF STOCK
SPI Interface
Mold Close and ejector forward interlock -
OUT OF STOCK
Star Robot Model: XQ-600V -
OUT OF STOCK
Excellent S/B rebuilt 2009 and barrel lined
New Hydraulic pumps, heater bands, clamp spacer and leveling pads
Wittmann Robot W322
Min. mold with spacer 11.81
Min. mold without spacer 23.62 -
OUT OF STOCK
- Screw Diameter: 1.89"
- Max Plastic Pressure (PSI): 17,012
- Int. Ratio: 7.3
- Min / Max Mold Height: 9.84" / 26.7"
- HKO Pattern: 7" Both Ways
- Clamp Stroke: 16.9"
- Ejector Stroke: 5.12"
-
OUT OF STOCK
Robot Optional
Screw diameter: 115mm
1 corepull
3 air blows
Min mold with ejectors: 11.5"
Min mold without ejectors: 27.25"
Clamp stroke: 56"
Injection stroke: 18.5"
L/D: 20:1
Extra pump on machine for high speed clamp tonnage -
OUT OF STOCK
Tie Bar Height (Floor to Top Tie Bar): 114��� Hook Height�� (Hook to floor): 235.5��� x 254.5��� Hook height to Tie bar: 121.5��� Tie Bar Diameter: 7.08��� Max / Min Shut Height: 41.34��� / 13.78���
-
OUT OF STOCK
robot available -
OUT OF STOCK
Upgraded controller
2 core pulls
motion/ no motion
robot interface
2 stage air blow
intrusion (99.9 seconds possible)
Intellamold processing -
OUT OF STOCK
- Screw Size: 4"
- Minimum Daylight: 15"
-
OUT OF STOCK
Min Mold Height: 5.9"
Max Mold Height: 12.6"
Screw Size: 32mm -
OUT OF STOCK
Includes: Engel Sprue Picker Conair Tempro Mold Regulator TCI-DI Filtroil Filtering System -
- Full Load Amps: 39
-
OUT OF STOCK
Recent upgrades: 2006 Screw and PQ Valve -
OUT OF STOCK
PET Machine
Dual Stage Injection
Husky take-out robot, rear style -
OUT OF STOCK
PET Machine
Dual Stage Injection
Husky Take-out Robot, rear style -
OUT OF STOCK
90mm screw upgraded in 2011
-
OUT OF STOCK
Screw Diameter: 80 mm; L/D 22:1 Minimum Die Height: 13.78��� Platen Bolt Pattern: SPI STD Knockout: SPI STD. (2x8) (3x14)
-
OUT OF STOCK
Min Daylight: 11.81"
70mm Screw Diameter -
OUT OF STOCK
- Recent Upgrades: New Pump 2012
- Barrel & Screw Condition: Excellent
-
OUT OF STOCK
- Minimum Daylight: 51.2"
- Barrel / Screw Condition: Good / Excellent
- Shifts Run: 3 x 5 Days
- Recent Upgrades: New Pump in 2012
-
OUT OF STOCK
- Min Mold Thickness: 14.2"
