-
OUT OF STOCK
- Full Load Amps: 134
- Tecnomagnete Quick Change Platen
- Min Daylight: 12.2"
- Barrel / Screw: Good Condition, 45 mm
- Recent Upgrades: Pneumatic Valve Gate
-
OUT OF STOCK
- Full Load Amps: 71 Amps
-
OUT OF STOCK
- Min shut height: 13.8"
- Max. shut height: 41.3"
- Clamp Stroke: 46.25"
- Ejector Stroke: 9.8"
- L/D Ratio: A23:6:1 B-24:3:1
- Max plastic psi: A-29841 B-30668
- Full Load Amps: 700A main breaker
- At Additional Cost: FANUC R-2000iA/165F RJ3iB
-
OUT OF STOCK
- Min shut height: 9.8"
- Max shut height: 33.4"
- Clamp Stroke: 34.4"
- Ejector Stroke: 7.9"
- L/D Ratio: A-25:.0:1 B- 24.4:1
- Max Plastic PSI: A-30675 B-31459
- FLA 600A main breaker
-
OUT OF STOCK
- New Barrel and Screw (Cincinnati)
- Min Mold Thickness (spacer): 11.8"
- Min Mold Thickness (w/out spacer): 23.6"
- Max Daylight with spacer: 63.8"
-
OUT OF STOCK
- Mold Size: 11.02" to 21.65"
- Max Pressure: 28,511 psi
- Screw Diameter: 50mm - 50E
-
OUT OF STOCK
- Mold Size: 9.8" x 19.6"
- Max Pressure: 24,245 psi
- Screw Diameter: 50mm - 36E
-
OUT OF STOCK
- Min / Max Mold Height: 5.98" / 21.96"
- Ejector Stroke: 5.12"
-
OUT OF STOCK
- Min Mold Height: 9.84"
- Max Mold Height: 22.04"
- Clamp Stroke: 19.69"
- KO Pattern: 7" Vertical & Horizontal 4" x 16" H
- Ejection Stroke: 6.3"
- Screw Diameter: 45 mm
-
OUT OF STOCK
- Clamp Stroke: 23.62"
- Min Mold Height: 9.84"
- KO Pattern: 7: Vertical & Horizontal 4" x 16" V
- Ejection Stroke: 7.09"
- Screw Size: 40 mm
-
OUT OF STOCK
- Min / Max Mold Height: 6.5" / 15"
- Air Blow: Yes
- Screw Diameter: 1.77"
-
OUT OF STOCK
- Full Load Amp: 175
- Editable Core Pullers
- Air Valves
- Gas Injection
- Binary Mold I.D.
- Mold Rotate
- HKO Ejector: 7.87"
-
OUT OF STOCK
- Full Load Amps: 288
- Editable Core Pullers
- Air Valves
- Gas Injection
- Binary Mold I.D.
- Mold Rotate
- HKO Ejector: 7.87"
-
OUT OF STOCK
- Ejector Stroke: 7.8"
-
OUT OF STOCK
- Mold Stroke: 13.78"
- Min / Max Plate Distance: 9.84" / 23.62"
- Tie Bar Diameter: 2.17"
- Ejector Stroke: 3.15"
- Screw Diameter: 32 mm
-
OUT OF STOCK
- Screw Diameter: 24 mm
- Screw Stroke: 80 mm
- Sprue Break: 180 mm
- Hydraulic Ejector Stroke: 80mm
-
OUT OF STOCK
- Screw Diameter: 24 mm
- Max Nozzle Retraction: 180 mm
- Max Opening Stroke: 170 mm
- Hydraulic Ejector Stroke: 60 mm
- Min Mold Height: 50 mm
- Daylight Between Tie-Bars: 8.66"
-
OUT OF STOCK
- Min / Max Mold Height: 6.69" / 16.92"
-
OUT OF STOCK
- Min / Max Mold Height: 6.69" / 16.92"
-
OUT OF STOCK
- Min / Max Mold Height: 6" / 10"
-
OUT OF STOCK
- Min / Max Mold Height: 11.02" / 22.83"
-
OUT OF STOCK
- Min / Max Mold Height: 9.84" / 18"
-
OUT OF STOCK
- Min / Max Mold Height: 9.84" / 18"
-
OUT OF STOCK
- Min / Max Mold Height: 11.5" / 30.5"
-
OUT OF STOCK
- Hydraulic / Pneumatic Corepull
- Controller Types: Relay & Disk Drive
- Options / Upgrades: Comes with 3 Ton Advantage Air-Cooled Chiller, AEC Self-Loading, Stand-Alone PET Desiccant Dryer, Stand-Alone Control Panel, Manuals
- Barrel / Screw Condition: Good
-
OUT OF STOCK
- Includes: Acme Transformer, Brand New 20 oz. Spare Screw and Barrel
- Barrel / Screw Condition: Good
- Shifts Run: 2-3
- Recent Upgrades: Tie Bar Top / Front
-
OUT OF STOCK
- Minimum Daylight: 4"
- Barrel / Screw Condition: Good
- Shifts Run: 2
- Recent Upgrades: New Extruder Drive
-
OUT OF STOCK
- Mold Thickness: 9.8" - 20.1"
- Screw Diameter: 1.97"
- Plasticizing Capacity: 254 lbs/h
- Injection Pressure: 24,250 psi
- Clamping Stroke: 17.7"
- Min Mold Dims: 15.6" x 15.6"
-
OUT OF STOCK
- Min Daylight: 12.6"
-
OUT OF STOCK
- Minimum Daylight: 17.72"
-
OUT OF STOCK
- Minimum Daylight: 10"
- Screw Diameter: 80mm
- Air Blow: 2 Stage
- Clamp Stroke: 30"
- Min / Max Mold Thickness: 10" / 29"
- Ejector Stroke: 6"
- Tie Bar Diameter: 5.5"
-
OUT OF STOCK
- Full Load Amps: 92
- Min / Max Mold Height: 7.9" / 25.6"
- Wide Platen
-
OUT OF STOCK
- Full Load Amps: 92
- Min / Max Mold Height: 7.9" / 25.6"
- Wide Platen
-
OUT OF STOCKRotary and Wide Platen Machine
-
OUT OF STOCK
- Screw Diameter: 19.5 mm
-
OUT OF STOCK
- Max Mould Opening Stroke: 13.78"
- Min / Max Plate Distance: 9.8" / 23.6"
- Tiebar Diameter: 2.17"
- Ejector Stroke: 3.15"
- Screw Stroke: 4.72"
- Nozzle Stroke: 8.27"
- Screw Diameter: 28 mm
-
OUT OF STOCK
- Valve Gate: Air
- Air Blow: 2 Stage
- Max Clamp Stroke: 43"
- Minimum Mold Thickness: 14.2"
- Ejector Stroke: 7"
- Tie Bar Diameter: 5.5"
- Screw L/D Ratio: 25:1
-
OUT OF STOCK
- Magnetic Die Change System
-
OUT OF STOCK
- Ejector Stroke: 2.8"
-
OUT OF STOCK
- Min / Max Mold Height: 5.91" / 16.93"
- Max Ejector Stroke: 3.15"
- Screw Size: 32 mm
-
OUT OF STOCKIncludes Robot 6 Cascades, 4-10 out water manifold and 32 mold heater zone 130mm Screw 4 Cores & 1 Ejector
-
OUT OF STOCKIncludes Robot 4 Cascades, 5-10 water manifolds & 10 mold heater zones 4 Cores & 1 Ejector
-
OUT OF STOCKIncludes: Wittmann Robot Model: W721, 17 lbs payload Barrier Screw, Coining, Mold Guard Magnetic Platens
-
OUT OF STOCK
- Clamp Stroke: 23.64"
- Ejector Stroke: 5.91"
- Second Injection Unit: Mounted Vertically - 25 mm Screw (1.66 oz)
- 8 Zone Hot Runner Controller
- Air Blow
- Braun Externally Mounted Rotary Platen - 22" Diameter
-
OUT OF STOCK
- 820 Metric Tons / 900 US Tons
- Eject on the fly with accumulators
- Magnetic platen
-
OUT OF STOCK
- Includes: Identical Parts Machine
-
OUT OF STOCK
- Screw Diameter: 1.89"
- Max Plastic Pressure (PSI): 17,012
- Int. Ratio: 7.3
- Min / Max Mold Height: 9.84" / 26.7"
- HKO Pattern: 7" Both Ways
- Clamp Stroke: 16.9"
- Ejector Stroke: 5.12"
-
OUT OF STOCK
- Full Load Current: 108
-
OUT OF STOCKDie Thickness: 25.59��� - 51.18��� Clamping Stroke: 59.05��� Ejector Force: 42 Tons Ejector Stroke: 9.84��� Screw Diameter: 4.72���
-
OUT OF STOCK
- 2 Stage Core Pull
- Valve Gate: Air
- Air Blow - 2 Stage
- Max Clamp Stroke: 83.5���
- Min / Max Mold Thickness: 25.2��� / 60.6���
- Ejector Stroke: 10.8���
- Tie Bar Diameter: 11.05���
-
OUT OF STOCK2 Stage Air Blow Screw L/D Ratio: 20:1
-
OUT OF STOCKIncludes extra barrel
-
OUT OF STOCK
- 2 Stage Core Pull
- Valve Gate: Air
- Air Blow - 2 Stage
- Max Clamp Stroke: 83.5���
- Min / Max Mold Thickness: 25.2��� / 60.6���
- Ejector Stroke: 10.8���
- Tie Bar Diameter: 11.05���
-
OUT OF STOCK
- Screw Diameter: .984"
- Screw Stroke: 4.92"
- Max Clamp Stroke: 15.7"
- Min Mold Thickness: 8.3"
- Ejector Stroke: 4.9"
-
OUT OF STOCKVented screw and barrel
-
OUT OF STOCK
- Clamp Stroke: 52"
- Min Shut Height: 18.1"
- Ejector Stroke: 7.87"
- Screw Diameter: 110 mm
-
OUT OF STOCKRobot available for additional cost: AEC Sytrama Low Hours
-
OUT OF STOCKNew: Variable volume Rexroth pump Bosch injection proportional valve Injection cylinder rebuild